MAJiK Systems

#Connectivity

Manufacturing intelligence insights

A terminal running the four majik commands that read a PLC, name the machine, add a tag and publish it as Sparkplug B and plain MQTT
Connecting Machines

Your PLC does not speak Sparkplug B. Here is what publishes it for you.

Most machine controllers cannot send Sparkplug B on their own. Here is what the edge node in front of them has to do, and how to publish one machine in four commands.

Kamal Aman7 min read
One edge agent publishing PLC data as Sparkplug B into a unified namespace
Connecting Machines

Build a Unified Namespace without an Ignition or Kepware stack

A live picture of your factory data that every system reads from, published straight off your PLCs by a single edge agent.

Kamal Aman8 min read
An older PLC and a serial scale streaming live data through a small edge gateway
Connecting Machines

Connecting legacy controllers without a rip-and-replace

Older PLCs and serial devices can stream live data today. Here is the connectivity path that avoids touching the control logic.

Jay Locke6 min read
Live OEE replacing an end-of-shift spreadsheet on a packaged-goods line
OEE

From spreadsheets to live OEE: a 90-day shop floor rollout

How a packaged-goods producer moved from end-of-shift recaps to live, shop-floor-visible performance without replacing a controller.

Jeff MacLeod4 min read